Nickel 201 is an astronomical resource intensity of nickel that presents high effort corrosion obstruction and thermal steadiness. The carbon content which is present in Nickel 201 Bars in a less amount reveals that these bars are appropriate for use where carbon interaction is undesirable. These bars are normally used in areas where there are strict requirements on the ability of the material to withstand corrosive agents such as acids and alkalis.
This is one of the most defining characteristics of Nickel 201 Bars, which are known to possess a good high temperature toughness. This makes them suitable because they work for applications in industries such as aerospace, where the materials shall have to work under some conditions. It is, therefore, agreeable that Nickel 201 bars carrier stability to high temperatures thus meeting the structural and mechanical requirements of substance.
Table Of Content
Another property enjoyed by Nickel 201 bars is their strong corrosion resistant features that makes them suitable for use in chemical processing/chemical industry as well as marine environment. Nickel, in general, is well famed for the capability to protect against numerous corrosive environments, and Nickel 201 moves the overall dilemma another notch upwards.
It is made through a highly sophisticated process which establishes the highest purities of the bars without the presence of any impurities which may affect the function of the bars. This aspect of purity is important in applications whereby traces of any other substance would have dangerous impacts.
Apart from the techniques in mechanical properties, Nickel 201 Bars are equally versatile. They find applications where electrical conductivity is considered to be essential, like in electrical components. They are useful in fields where the material the product will be in contact with must be prevented from corroding but, at the same time, the product has to conduct electricity.
ASTM B160 / ASME SB160
EN, DIN, JIS, ASTM, BS, ASME, AISI
3 ~ 800mm
H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients requirements
Hex Bar Size:- 2-100mm A/F
Flat Bar Size:- Thickness: 2 -100mm, Width: 10 to 500mm.
Square Bar Size:- 4 to 100mm
Rectangular Bar Size:- 33 x 30mm to 295 x 1066mm, Thickness: 3.0 to 12.0mm.
Hollow Bar Size:- 32mm OD x 16mm ID to 250mm OD x 200mm ID)
Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Half Round Bar, Forged Hex bars, Forged Square Bars etc.
| STANDARD | UNS | WNR. | JIS | EN |
| Nickel 201 | N02201 | 2.4068 | NW 2201 | LC-Ni 99 |
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel 201 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Oil & Gas Industrires
Chemical Industries
Construction Industries
Offshore Pipelines & Pipe Works
Petrochemical Industry
Shipbuilding Industries
Hydraulic Applications
Piping Systems
Refining Industry
Food Processing Industry
Pulp & Paper Industry
Power Plant Industry
Japan, Kuwait, Mongolia, Yemen, Oman, Canada, Algeria, Taiwan, Mexico, Ghana, Ecuador, Namibia, Colombia, Ireland, Bulgaria, Switzerland, Zimbabwe, Lebanon, Poland, Kenya, Serbia, United Kingdom, Morocco, South Africa, Sri Lanka, Belgium, Egypt, Gabon, Brazil, United States, Finland, Pakistan, Lahore, Israel, Bolivia, Greece, Argentina, Germany, Australia, Romania, Turkey, France, New Zealand, Saudi Arabia, Angola, Croatia, Norway, Algiera, China, Chile, Costa Rica, Jordan, Tibet, Malaysia, Portugal, Vietnam, Netherlands, Sweden, Nepal, Spain, columbia, Iran, Bangladesh, Ukraine, Russia, Italy, Venezuela, Belarus, Hong Kong, South Korea, Iraq, Tunisia, Czech Republic, India, Indonesia, Slovakia, Qatar, Denmark, Trinidad & Tobago, Azerbaijan, Gambia, Puerto Rico, Austria, Estonia, Kazakhstan, Afghanistan, Philippines, Thailand, United Arab Emirates, Peru, Bahrain, Singapore, Bhutan, Libya, Hungary, Nigeria, Lithuania, Macau.
Pune, Jaipur, Thane, Kanpur, Haryana, Rajkot, mumbai, Gurgaon, Hyderabad, Faridabad, Thiruvananthapuram, Ludhiana, Nashik, Ernakulam, Noida, Chandigarh, Navi Mumbai, Ahmedabad, New Delhi, Kolkata, Ranchi, Chennai, Secunderabad, Nagpur, Visakhapatnam, Surat, Pimpri-Chinchwad, Jamshedpur, Bhopal, Howrah, Bengaluru, Indore.
